References | Ultra-X Support

The Q-Code LED design provides you with a 2-digit error code that displays the system status.

You can hear the beep codes through the onboard piezoelectric speaker. For Intel® Desktop Boards without the onboard speaker, you can hear the beeps through a speaker attached to the line out audio jack on the board...

If a HP branded desktop or workstation PC makes beeps and does not start, a serious hardware issue is likely occurring. The following beep codes are a reference to many HP desktop and workstation computers. Use these...

Beep State Meaning 1 long beep followed by 2 short beeps Video configuration failure (a faulty video card or no card installed), or an external ROM module does not properly checksum to zero. 1 Refresh failure 2 Parity...

Common BIOS / CMOS Setup Settings Hot Keys Acer F1, F2, Ctrl+Alt+Esc Apple Hold Option Key Asus F2, Del Compaq F10 Dell F12 eMachine Del, F2 Gateway F1, F2 HP F10, Esc IBM F1 Intel (Motherboards & NUC) F2, DEL Lenovo F1...

An interface error is defined as a failure of the receiver on a port to recover the data as transmitted by the device port connected to the receiver. The error may be detected as a running disparity error, illegal code...

Recoverable errors are those detected and corrected by the drive, and do not require user intervention.Recoverable Data errors will use correction, although ECC on-the-fly is not considered for purposes of recovered...

A seek error is defined as a failure of the drive to position the heads to the addressed track. After detecting an initial seek error, the drive automatically performs an error recovery process. If the error recovery...

An unrecoverable data error is defined as a failure of the drive to recover data from the media. These errors occur due to head/media or write problems. Unrecoverable data errors are only detected during read operations...

Activity Beeps Possible Cause Recommended Action Green Power On None None Working System Green Power LED flashes every two seconds None Computer in Suspend to RAM mode (some models only) or normal Suspend mode. None...

Visible blink patterns display via the front panel power LED. LED Blink Pattern Sequence/Pattern Meaning Troubleshooting Steps 2 blinks On-off (1.0 second each) two times, then 2.5-second pause (off). The pattern repeats...