Getting Started / Onboarding | Ultra-X Support

PC Inspector supports the following Windows 32 & 64 bit Operating systems: Windows PE Windows 7 Windows 8 Windows 8.1 Windows 10 Windows Server 2008 Windows Server 2012 Windows Server 2016 Windows Server 2019

PC Inspector is a portable application and does not require any installation. With a CloudOne subscription, PC Inspector may be packaged into a self-extracting exe with prebuilt scripts for easy deployment across remote...

Note: Before running PC Inspector software, make sure all other applications are closed. To start PC Inspector, double-click on the PCI.EXE file. Note: The Ultra-X License USB Dongle is required to run PC Inspector and...

During PC Inspector initialization, a prompt will display advising that Windows System Event Logs will be analyzed. To skip this check, click the SKIP button. Once PC Inspector has initialized, the main console will...

This section describes the Diagnostic function. Three options are available in the Diagnostic menu.   Default Check Will perform basic testing on the motherboard (PCI and ACPI), memory (16 test patterns), primary storage...

To abort an individual component test, press Ctrl+N

To abort all tests, press the [ESC] key

Once testing is complete, the Top banner will display in green or red and display the corresponding test status result. Options are available to Print a report, show the report in the default browser, email the report...